Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M12-1.75, 50mm Length (Pack of 5)

Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M12-1.75, 50mm Length (Pack of 5) Review

Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M12-1.75, 50mm Length (Pack of 5) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M12-1.75, 50mm Length (Pack of 5) Overview

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Good for permanent setting of parts, the sharp point of the Cone penetrates deep into the surface to lock in place.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 31, 2010 21:26:31

Recommend : Electric Wall Oven

Brass Set Screw, Hex Socket Drive, Cup Point, #10-32, 1/4" Length (Pack of 10)

Brass Set Screw, Hex Socket Drive, Cup Point, #10-32, 1/4" Length (Pack of 10) Review

Brass Set Screw, Hex Socket Drive, Cup Point, #10-32, 1/4" Length (Pack of 10) Feature

• Set Screws keep parts from turning relative to a shaft
• Brass is suitable where corrosion resistance is a primary consideration
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Brass Set Screw, Hex Socket Drive, Cup Point, #10-32, 1/4" Length (Pack of 10) Overview

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 30, 2010 19:32:17

Thanks To : Dishwashers Appliances Dishwasher Portable Large Refrigerators

Nylon Slotted Set Screws 10-24, 1.25" Length (Pack of 100)

Nylon Slotted Set Screws 10-24, 1.25" Length (Pack of 100) Review

Nylon Slotted Set Screws 10-24, 1.25" Length (Pack of 100) Overview

Nylon 6/6 slotted set screws are tough, lightweight, and will not damage the surface they touch, so they are a good choice if you will be making frequent adjustments. Screws are off-white, nonconductive and chemical resistant. Temperature range is -40 Degrees to 185 Degrees F. Class 2A thread fit. Install these set screws with a standard slotted screwdriver. Length does not include the drive portion.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 28, 2010 16:20:52

Friends Link : Electric Wall Oven

Fine Thread Socket Head Cap Screw Plain 10-32 X 1/4 (Pack of 100)

Fine Thread Socket Head Cap Screw Plain 10-32 X 1/4 (Pack of 100) Review

Fine Thread Socket Head Cap Screw Plain 10-32 X 1/4 (Pack of 100) Overview

Fine Thread Socket Head Cap Screw Plain 10-32 X 1/4 (Pack of 100)

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 26, 2010 15:54:40

See Also : Micro fiber sofa Stainless Steel Dishwasher Electric Wall Oven

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M6-1, 35mm Length (Pack of 10)

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M6-1, 35mm Length (Pack of 10) Review

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M6-1, 35mm Length (Pack of 10) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M6-1, 35mm Length (Pack of 10) Overview

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 25, 2010 15:29:25

Recommend : Appliances Cooktops DVD Video Players Bedroom furniture beds

Polycarbonate Machine Screw, Binding Head, Slotted Drive, #10-24, 5/8" Length (Pack of 25)

Polycarbonate Machine Screw, Binding Head, Slotted Drive, #10-24, 5/8" Length (Pack of 25) Review

Polycarbonate Machine Screw, Binding Head, Slotted Drive, #10-24, 5/8" Length (Pack of 25) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Polycarbonate is suitable where high impact strength and hardness are primary considerations
• Binding head provides a large surface area for extra surface contact under the head
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Polycarbonate Machine Screw, Binding Head, Slotted Drive, #10-24, 5/8" Length (Pack of 25) Overview

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polycarbonate is one of the toughest, most dimensionally stable thermoplastics over a wide temperature range. Impact Strength, as measured by the Izod impact test method (which measures force required to break material), is 17 pounds per foot. This is significantly tougher than standard Nylon 6/6, which is rated at 3 pounds per foot. Polycarbonate is a relatively non-hydroscopic material; it will only absorb extremely low amounts of water even after extended exposure. Polycarbonate is very resistant to greases, oils, detergents, aliphatic hydrocarbons, most mineral acids, and the higher alcohols. It is does not perform well with chlorinated hydrocarbons, and most aromatic solvents, esters, and ketones. Polycarbonate has a blue tinted transparency with 89% light transmission. Tensile strength is approximately 10,000 psi (pounds per square inch).

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 24, 2010 03:59:00

Related : Appliances Cooktops Micro fiber sofa

1/4-20x1 Philips Pan Machine Screws Coarse Thread Zink

1/4-20x1 Philips Pan Machine Screws Coarse Thread Zink Review

1/4-20x1 Philips Pan Machine Screws Coarse Thread Zink Feature

• zink plated
• pan philips head
• 1" long
• 1/4" diameter
• pack of 25

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 22, 2010 09:36:49

Tags : DVD Video Players

3/4-10 S/S Hex Cap Screws 10

3/4-10 S/S Hex Cap Screws 10 Review

3/4-10 S/S Hex Cap Screws 10 Overview

3/4-10 standard hex head cap screws, also known as hex cap bolts, made of 18-8 stainless steel for corrosion resistance. Various sizes and lengths available. Sold individually and in quantities.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 21, 2010 09:06:57

Visit : Cooktops Ranges

Stainless Steel Socket Cap Screw, Hex Socket Drive, M5-0.8, 25mm Length (Pack of 100)

Stainless Steel Socket Cap Screw, Hex Socket Drive, M5-0.8, 25mm Length (Pack of 100) Review

Stainless Steel Socket Cap Screw, Hex Socket Drive, M5-0.8, 25mm Length (Pack of 100) Feature

• Socket Cap Screws are durable and reliable
• Stainless Steel is suitable where formability and cost are important considerations
• Socket cap head fasteners are very common in industrial applications
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Stainless Steel Socket Cap Screw, Hex Socket Drive, M5-0.8, 25mm Length (Pack of 100) Overview

Socket Cap Screws, also known as Allen head screws, are reliable and durable and are used in many applications. They are available in a variety of head styles and materials.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

With a high cylindrical head, socket cap head fasteners have a recessed driving area and offer high hold power at high torque levels. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 20, 2010 08:14:18

My Links : Electric Wall Oven Dishwashers Appliances

Import 88546452 10-24 X 1/4" 50/pk Button Hd Sck Cap Screw

Import 88546452 10-24 X 1/4" 50/pk Button Hd Sck Cap Screw Review

Import 88546452 10-24 X 1/4" 50/pk Button Hd Sck Cap Screw Feature

• Package Quantity: (1) 50 Pack
• Type: Button Head Socket Cap Screws
• Thread Size: 10-24
• Length Under Head (Inch): 1/4
• Material: Alloy Steel - Grade 8
• Key Size (Inch): 1/8
• Finish/Coating: Black Oxide

Import 88546452 10-24 X 1/4" 50/pk Button Hd Sck Cap Screw Overview

Button Head Cap Screw - Socket Products Type: Button Head Socket Cap Screws Thread Size: 10-24 Length Under Head: 1/4 Material: Alloy Steel - Grade 8 Finish/Coating: Black Oxide

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 19, 2010 06:52:04

My Links : Electric Wall Oven Furniture Dining Room

Nylon Thumb Screw, Knurled Head, Slotted Drive, #6-32, 5/16" Length (Pack of 100)

Nylon Thumb Screw, Knurled Head, Slotted Drive, #6-32, 5/16" Length (Pack of 100) Review

Nylon Thumb Screw, Knurled Head, Slotted Drive, #6-32, 5/16" Length (Pack of 100) Feature

• Thumb Screws allow for simple "by-hand" installation
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Knurled head provides extra grip for manual tightening
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Nylon Thumb Screw, Knurled Head, Slotted Drive, #6-32, 5/16" Length (Pack of 100) Overview

Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head which allows for simple "by-hand" installation.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Usually found on thumb screws, a knurled surface on the head gives a better gripping surface, making it easier to tighten or loosen fasteners manually. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 17, 2010 18:24:12

My Links : Bedroom furniture beds Large Refrigerators Furniture Recliners

Screws, Wood, Brass, No. 8 x 5/8"

Screws, Wood, Brass, No. 8 x 5/8" Review

Screws, Wood, Brass, No. 8 x 5/8" Feature

• High quality flathead slotted screws in boxes of 100.
• Solid brass.

Screws, Wood, Brass, No. 8 x 5/8" Overview

High quality flathead slotted screws in boxes of 100.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 16, 2010 14:55:07

Recommend : Electric Wall Oven Appliances Cooktops

Kreg Pocket-Hole #7 Screw x 1-1/2" Fine (500)

Kreg Pocket-Hole #7 Screw x 1-1/2" Fine (500) Review

Kreg Pocket-Hole #7 Screw x 1-1/2" Fine (500) Feature

• Pocket-hole screws #7 x 1-1/2" fine
• Use with any combination of softwoods, plywood, and composites
• Fine threads provide greater holding power
• Washer-head style
• 500 pack

Kreg Pocket-Hole #7 Screw x 1-1/2" Fine (500) Overview

Designed for pocket-hole systems, Kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combination of softwoods, plywood, and composites, and fine is for hardwoods.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 15, 2010 09:41:00

Recommend : Leather sectional sofa Ranges Appliances Cooktops Ranges

#10-24 Bronze Machine Screws RH 10-24 x 2-1/2

#10-24 Bronze Machine Screws RH 10-24 x 2-1/2 Review

#10-24 Bronze Machine Screws RH 10-24 x 2-1/2 Overview

#10-24 silicon bronze machine screws with round head and slotted or straight slot drive. The Round Head has a semi-elliptical top surface with a flat bearing surface underneath. The flat bearing surface allows for lateral movement (as opposed to a Flat or Oval Head that have a countersunk bearing surface that will self-center in the mounting holes) when attaching hardware. Generally chosen for it's traditional appearance.Many boatbuilders especially ones with traditional old school tendencies prefer a silicon bronze machine screw. Silicon bronze offers great corrosion resistance and along with the slot drive provides the classic look of traditional boatbuilding.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 14, 2010 08:46:09

Friends Link : Livingroom Furniture Sofa

#14 Self Tappers OP 14 x 1

#14 Self Tappers OP 14 x 1 Review

#14 Self Tappers OP 14 x 1 Overview

#14 Oval head phillips drive self tapping screws made of stainless steel. Sometimes called sheet metal screws or self tappers, these fasteners are common for home repairs as well as installing hardware on your boat. Oval head screws are used primarily for trim work or anywhere a smooth top is desired. The slightly rounded head projects above the finished surface and prevents the snags that occur when a flat head screw is not fully countersunk. Use where appearance is a factor.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 12, 2010 18:29:10

Tags : Cooktop Gas

#8-32 S/S Machine Screws RH FSSMSRH832X23/4 8-32 x 2-3/4

#8-32 S/S Machine Screws RH FSSMSRH832X23/4 8-32 x 2-3/4 Review

#8-32 S/S Machine Screws RH FSSMSRH832X23/4 8-32 x 2-3/4 Overview

#8-32 Round Head Slotted Drive Stainless Steel Machine Screws have a semi-elliptical top surface with a flat bearing surface underneath. The flat bearing surface allows for lateral movement when attaching hardware. These fasteners are often chosen for their traditional appearance.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 11, 2010 10:34:04

Thanks To : Dishwasher Portable Livingroom Furniture Sofa Ranges Appliances

Spectrum Diversified 15050 Suction Cup With Hook

Spectrum Diversified 15050 Suction Cup With Hook Review

Spectrum Diversified 15050 Suction Cup With Hook Feature

• Spectrum Diversified
• 15050
• Hooks & Screw Eyes
• Clear

Spectrum Diversified 15050 Suction Cup With Hook Overview

Spectrum Diversified 15050 Suction Cup With HookSpectrum Diversified 15050 Suction Cup With Hook Features:; Can be used to organize bathroom accessories and more; Clear; 15050: 7/8" diameter, 5 per card; 15150: 1-1/2" diameter, 3 per card; 15250: 1-3/4" diameter, 2 per card

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 09, 2010 18:36:03

Thanks To : Ranges Appliances Large Refrigerators

Made in USA NAS1352N02-4 2-56x1/4 Super Alloy Mil Spec Shcs

Made in USA NAS1352N02-4 2-56x1/4 Super Alloy Mil Spec Shcs Review

Made in USA NAS1352N02-4 2-56x1/4 Super Alloy Mil Spec Shcs Feature

• Package Quantity: (1) Piece
• Type: Socket Head Cap Screws
• Thread Size: 2-56
• Length Under Head (Inch): 1/4
• Material: Super Alloy - A-286
• Key Size (Inch): 5/64
• Finish/Coating: Passivate

Made in USA NAS1352N02-4 2-56x1/4 Super Alloy Mil Spec Shcs Overview

Socket Head Cap Screws - NAS A-286 Alloy Type: Socket Head Cap Screws Thread Size: 2-56 Length Under Head: 1/4 Material: Super Alloy - A-286 Finish/Coating: Passivate

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 08, 2010 18:02:03

See Also : Hoods Range

M8 x 1.25 Thd., 8mm Lg., Nylon Tipped Hex Socket Set Screws, Metric Alloy Steel (1 Each)

M8 x 1.25 Thd., 8mm Lg., Nylon Tipped Hex Socket Set Screws, Metric Alloy Steel (1 Each) Review

M8 x 1.25 Thd., 8mm Lg., Nylon Tipped Hex Socket Set Screws, Metric Alloy Steel (1 Each) Overview

Brass and Nylon Tipped Hex Socket Set Screws - Metric - Alloy Steel

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 07, 2010 10:00:17

Friends Link : Furniture Recliners

Alloy Steel Socket Cap Screw, Hex Socket Drive, M4-0.7, 10mm Length (Pack of 50)

Alloy Steel Socket Cap Screw, Hex Socket Drive, M4-0.7, 10mm Length (Pack of 50) Review

Alloy Steel Socket Cap Screw, Hex Socket Drive, M4-0.7, 10mm Length (Pack of 50) Feature

• Socket Cap Screws are durable and reliable
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Socket cap head fasteners are very common in industrial applications
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Alloy Steel Socket Cap Screw, Hex Socket Drive, M4-0.7, 10mm Length (Pack of 50) Overview

Socket Cap Screws are reliable and durable and are used in many applications. They are available in a variety of head styles and materials.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

With a high cylindrical head, socket cap head fasteners have a recessed driving area and offer high hold power at high torque levels. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 06, 2010 07:40:12

My Links : Large Refrigerators Electric Wall Oven

#10-24 S/S Machine Screws OH 10-24 x 1-1/4

#10-24 S/S Machine Screws OH 10-24 x 1-1/4 Review

#10-24 S/S Machine Screws OH 10-24 x 1-1/4 Overview

#10-24 Stainless steel oval head slotted or straight slot drive machine screws. Stainless Steel machine screws provide excellent corrosion resistance and are the work horse for modern boatbuilding or exterior woodworking applications. Sold in boxes of 100. Oval head screws are used primarily for trim work or anywhere a smooth top is desired. The slightly rounded head projects above the finished surface and prevents the snags that occur when a flat head screw is not fully countersunk. Use where appearance is a factor.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 05, 2010 01:58:03

Tags : Large Refrigerators

Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, M4-0.7, 70mm Length (Pack of 10)

Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, M4-0.7, 70mm Length (Pack of 10) Review

Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, M4-0.7, 70mm Length (Pack of 10) Feature

• Socket Cap Screws are durable and reliable
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Flat head style allows fastener to sit flush to the surface
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, M4-0.7, 70mm Length (Pack of 10) Overview

Socket Cap Screws are reliable and durable and are used in many applications. They are available in a variety of head styles and materials.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 04, 2010 01:10:07

Thanks To : Sectional Furniture

Stainless Steel 18-8 Flat Head Phillips Machine Screw 10-24, 3/8" L, MS51959-61 (Pack of 25)

Stainless Steel 18-8 Flat Head Phillips Machine Screw 10-24, 3/8" L, MS51959-61 (Pack of 25) Review

Stainless Steel 18-8 Flat Head Phillips Machine Screw 10-24, 3/8" L, MS51959-61 (Pack of 25) Overview

Dimensions,tensile,hardness,threads,recess,headmaking to MS-NAS-AN specs, procurement spec FF-S-92, Fed Std H28/2, Fed Std H28/20 system 22,23. Magnetic permeability to procurement spec FF-S-92, ASTM 1444. Quality assurance to procurement spec FF-S-92 (Mil Std 1312). Inspection system requirement per Mil-1-45208. Materials and dimensions meet Fed. Spec FF-S-92. Passivated to QQ-P-35, ASTM A380. Rockwell Hardness B85-B95. Minimum Tensile Strength 80,000 psi.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 02, 2010 21:30:10

Friends Link : DVD Video Players Bedroom furniture beds Cooktops Ranges

Two-Pack of 2" Screws - Antique Bronze

Two-Pack of 2" Screws - Antique Bronze Review

Two-Pack of 2" Screws - Antique Bronze Overview

These 2" screws can be used to mount select registers and returns to your floor or wall. The luxury finishes match those on the vents, giving the piece a seamless look. Set of two. Bronze Patina screws are made of solid bronze. Black Powdercoat screws are made of stainless steel. All other finishes are made of solid brass. For use with select floor registers and air returns. See related items below. Use to mount vents to walls or floors. Shown in Bronze Patina finish. Available in finishes listed below. 5 year finish warranty. Ships in 1-2 business days.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 01, 2010 17:46:52

Visit : Bedroom furniture beds Appliances Cooktops Dishwashers Appliances